PCGS 999134 - Ike Dollar, Silver (1971-1974)

From CoinFactsWiki
Jump to: navigation, search
Ike Dollar, Silver (1971-1974)

Navigate to PCGS numbers: Ike Dollar, Clad (1971-1978)


Authorization

[1]The Coinage Act of July 23, 1965 included a provision that no standard silver dollars were to be coined for a period of five years.

Near the end of the five year ban, Congressman Bob Casey of Texas introduced a bill into the House on October 29, 1969 calling for a circulating commemorative dollar to honor both Dwight Eisenhower and the Apollo XI space flight. Eisenhower died six months earlier and America had a significant sentiment for the WWII hero and two-term president. Additionally, there was pressure for dollar-sized coins from the Nevada gambling casinos, which yearned for a return to the days when the action at the tables was with American silver dollars. With the silver content of a silver dollar now well beyond face value of a silver dollar, silver dollars had disappeared. Casinos had to pay premiums to buy Morgan and Peace dollars, which the public would keep, or order dollar-size tokens from the General Numismatics Corporation, which later became known as the Franklin Mint. If you can get the US Government to provide your business supplies, by coining a new dollar coin, why not go for it?

It took more than a year, but after much political bickering, it became law on December 31st, 1970. The bill called for a circulating coin made from the same metal content (copper and nickel) used in the dime and quarter (clad) and which was to be used for half dollars in 1971. The bill also authorized the coining of up to 150 million silver-clad coins for collectors that would be made similar to the half dollar produced from 1965-1969 which was two layers. The outer layers would be 80% silver and 20% copper while the inner layer, or core, would be approximately 21% silver and 79% copper. Overall, it was a 40% silver mix. An amendment to the bill called for a portion of the profits from these collector coins to be donated to Eisenhower College in Seneca Falls New York. Despite receiving about $9 million dollars from this source, the college ultimately folded.

With the political issues now out of the way, Mint Director Mary Brooks wanted the new dollar in production quickly. Rather than going through a public design competition, the job was turned over to Mint Chief Engraver Frank Gasparro. Gasparro already had two designs to his credit in production; the back of the Lincoln Cent starting in 1959 and the reverse of the Kennedy Half Dollar. Later, he would also provide the designs for the ill-fated Susan B. Anthony dollar. Anticipating the new coinage, Gasparro had already begun work on the designs. Even though the first “Ike” dollar was not coined until November 1971, the first designs had the date of 1970. Although it is not clearly known why it took until late 1971 to release the new dollar, it has been speculated that there were numerous design deficiencies. For example, the relief was too high, and in fact, coins struck for circulation that year are now known as Type I while proofs are of Type II which has a higher relief. Additionally, the copper-nickel combination is a harder metal than the 90% silver composition which resulted in poor strikes.

Not uncommon when a new coin/issue is released, collectors and the public hoarded a good portion of what was released on that day and over the next few months. Over time, the new dollar reached the channels of commerce and then the issue that is still prevalent today revealed itself, which was that the American public did not want to use a dollar coin. Since the new dollars were not often seen, casinos also had a hard time keeping them on hand as people thought they were rare and kept them.

The year of 1975 saw a change to the design. Just like the quarter and half dollar, the dollar coin underwent a design change to commemorate the bicentennial. A nationwide contest was held and the winner was Dennis R. Williams. His design of a Liberty Bell superimposed on the moon was the winner. It is similar to the design on the reverse of the Franklin Half Dollar. No coins were dated 1975. Those produced in 1975 were of the bicentennial type. Beginning in 1977, the dollar coin went back to the traditional design. Due to the lack of public acceptance, the IKE dollars were produced for the last time in 1978 making way for the ill-fated Susan B. Anthony dollar.


Obverse

Frank Gasparro

Chief Engraver Frank Gasparro's design portrays on the obverse a bare-headed, left-facing profile bust of the late president. Arranged in an arc above him is the legend LIBERTY, while the motto IN GOD WE TRUST appears in two lines below Eisenhower's chin. The date is at bottom, with the mintmark (if any) above it and to the right. Gasparro's initials FG are on the truncation of the bust.

Reverse

Frank Gasparro's reverse depicts the American eagle, an olive branch of peace in its talons, descending onto the moon. The distant Earth is in the field above and to the left. The motto E PLURIBUS UNUM is centered above the eagle, and the legend UNITED STATES OF AMERICA is arranged in an arc around the upper periphery. The value ONE Dollar is superimposed on the moon's surface along the lower periphery. An arc of small stars surrounds the eagle, Earth and the motto. The initials FG appear below the eagle's tail.

1776-1976 ONE DOLLAR - BICENTENNIAL reverse

[2]By Dennis R. Williams, whose clever concept of the Liberty Bell superimposed on the moon provided a link between past and present (his initials DRW are found to the right of the bell's clapper). The regular dollar coinage dated 1974 continued until the middle of 1975, when production of the new Bicentennial designs dated 1776-1976 began. This left no dollar coins dated 1975. The Bicentennial pieces were first released in the fall of 1975, and their mintage continued through the following year. Silver-clad coins were made at San Francisco, in addition to the circulating version coined at Philadelphia and Denver. The regular design returned in 1977 and 1978, when the Eisenhower series was terminated in favor of the ill-fated Susan B. Anthony "mini dollar." For these two years, however, no Ikes were coined in silver

Mintage

EISENHOWER DOLLARS (1971-1978) Mintage

Specification

Type I

  • Metal Content: Outer layers - 75% Copper, 25% Nickel - Center - 100% Copper
  • Weight: 350 grains (22.7 grams)

Type II

  • Metal Content: Outer layers - 80% Silver, 20% Other -Center - 79% Copper, 21% Nickel
  • Weight: 380 grains (24.6 grams) Net weight silver .3161 oz. pure silver.

Type III, Clad, 1776-1976 ONE DOLLAR - BICENTENNIAL

  • Mintage: Circulation strikes: 117,337,000
  • Proofs: 4
  • Metal Content: Outer layers - 75% Copper, 25% Nickel - Center - 100% Copper
  • Weight: 350 grains (22.7 grams)

Type IIII, Silver, 1776-1976 ONE DOLLAR - BICENTENNIAL

  • Circulation strikes: estimated 5,000,000
  • Proofs: estimated 4,000,000
  • Metal Content: Outer layers - 80% Silver, 20% Other -Center - 79% Copper, 21% Nickel - Net weight silver .3161 oz. pure silver.
  • Weight: 380 grains (24.6 grams)

Please note: The subject of Ike dollars is a bit confusing when it comes to Types. For the purpose of this article, Types is a difference in metal content. For Types, as in tailfeather differences or variation of eagles, that can be found in the separate articles for each coin, by Type. --- I am sure this effort to clarify this topic (Types), will not clarify it.

Catalog reference

Prices realized from past auction lots. (PCGS Holder)

PCGS Price Guide [1]

Source

  • [2]Coin Community Family
  • [1]Keith Scott
  • Yeoman, R. S., and Kenneth Bressett (ed.), A Guide Book of United States Coins, 59th Ed., Atlanta, GA: Whitman Publishing, 2005.
  • U.S. Mint

Gallery